Artículos

Artículos publicados en Revistas Internacionales indexadas con revisión (JCR)

  1. Oñate, S. Oller, J. Oliver, J. Lubliner (1988). A Constitutive Model for cracking of Concrete Based on Incremental Theory of Plasticity. Engineering Computation. Vol. 5, No. 4, pp. 303-319. 1988. ISSN: 0264-4401.
  2. Oller, J. Oliver, J. Lubliner, E. Oñate (1988). Un Modelo Constitutivo de Daño Plástico Para Materiales Friccionales: Parte I, Variables Fundamentales, Funciones de Fluencia y Potencial. Revista Internacional de Métodos Numéricos para el Cálculo y diseño en Ingeniería Vol 4, No.4, pp. 397,431. 1988. ISSN: 0213-1315.
  3. Oller, J. Oliver, J. Lubliner, E. Oñate (1988). Un Modelo Constitutivo de Daño Plástico Para Materiales Friccionales: Parte II, Generalización para Procesos con Degradación de Rigidez, Ejemplos. Revista Internacional de Métodos Numéricos para el Cálculo y diseño en Ingeniería Vol 4, No.4, pp. 433,461. 1988. ISSN: 0213-1315.
  4. Lubliner, J. Oliver, S. Oller,E. Oñate (1989). A Plastic-Damage Model for Concrete. International Journal of Solids and Structures, Vol.25, No.3, pp. 299,326. 1989. ISSN: 0020-7683.
  5. Oller, E. Oñate, J. Oliver, J. Lubliner (1990). Finite Element Non-Linear Analysis of Concrete Structures Using a Plastic-Damage Model”. Engineering Fracture Mechanics, Vol 35; pp 219-23. Pergamon Press 1990. ISSN: 0013-7944.
  6. Celentano, S. Oller, E. Oñate (1993). A finite element model for thermomechanical analysis in casting processes. Journal de Physique IV, 1993, 03 (C7), pp.C7-1171-C7-1180. 10.1051/jp4:19937182. jpa-00251814. ISSN. 1155-4339. DOI: http://dx.doi.org/10.1051/jp4:19937182 (http://jp4.journaldephysique.org/)
  7. Barbat, A. Hanganu, E. Oñate, S. Oller (1994). Evaluation of The Damage Degree in Buildings Structures Subjected to Earthquakes. Reveu Romaine des Sciences Techniques Mécanique Appliquée. Académie Roumaine. Tome 39, No. 1. 1994. ISSN: 0035-4074.
  8. Celentano, E. Oñate, S. Oller (1994). A Temperature-Based Formulation for Finite Element Analysis of Generalized Phase Change Problems. International Journal of Numerical Methods in Engineering. Vol. 37, pp. 3441-3465. 1994. ISSN: 0029-5981.
  9. Oller, S. Botello, J. Miquel Canet and E. Oñate (1995). An Anisotropic Elasto-Plastic Model Based on an Isotropic Formulation. Engineering Computation. Vol. 12, No. 3, pp. 245-262. 1995. ISSN: 0264-4401.
  10. Oller, E. Oñate, J. Miquel Canet and S. Botello (1996). A Plastic Damage Constitutive Model for Composite Materials. International Journal of Solids and Structures. Vol. 33, No.17, pp. 2501-2518. 1996. ISSN: 0020-7683.
  11. Luccioni, S. Oller, R. Danesi (1996). Coupled Plastic-Damage Model. Computer Methods in Applied Mechanics and Engineering. Vol. 129, No. 1-2, pp. 81-90. 1996. ISSN: 0045-7825.
  12. Celentano, S. Oller, E. Oñate (1996). A Coupled Thermomechanical Model for the Solidification of Casted Metals. International Journal of Solids and Structures. Vol.33, No.5, pp. 647,673. 1996. ISSN: 0020-7683.
  13. Oller, E. Oñate, J. Miquel (1996). A Mixing Anisotropic Formulation for the Composites Behaviour Simulation. Communications in Numerical Methods in Engineering. Vol. 12, pp. 471,482. 1996. ISSN: 1069-8299.
  14. Oliver, S. Oller, J. Cante (1996). A Plastic Model for Simulation of Industrial Powder Compaction Processes. International Journal of Solids and Structures. Vol.33, No.20-22, pp. 3161-3178. 1996. ISSN: 0020-7683.
  15. Oller, E. Oñate (1996). A Hygro-Thermo-Mechanical Constitutive Model for Multiphase Composite Materials. International Journal of Solids and Structures. Vol.33, No.20-22, pp. 3179-3186. 1996. ISSN: 0020-7683.
  16. Barbat, S. Oller, E. Oñate, A. Hanganu (1997). Viscous Damage Model for Timoshenko Beam Structures. International Journal of Solids and Structures. Vol.34, No.30, pp. 3953-3976. 1997. ISSN: 0020-7683.
  17. Oller, B. Luccioni, A. Barbat (1996). Un Método de Evaluación del Daño Sísmico en Estructuras de Hormigón Armado. Revista Internacional de Métodos Numéricos para el Cálculo y diseño en Ingeniería Vol. 12, No.2, pp. 215-238. 1996. ISSN: 0213-1315.
  18. Luccioni, S. Oller (1996). Evaluación del Daño Sísmico en Pórticos De Hormigón Armado. Revista Internacional de Ingeniería de Estructuras. Vol. 1, No.1, pp. 1-16. 1996. ISSN: 1390-0315.
  19. Cante, J. Oliver, S. Oller. (1998). Simulación Numérica de Procesos de Compactación de Pulvimateriales – Parte I. Revista Internacional de Métodos Numéricos para el Cálculo y diseño en Ingeniería Vol. 14, No.1, pp. 67-99. 1998. ISSN: 0213-1315.
  20. Cante, J. Oliver, S. Oller (1998). Simulación Numérica de Procesos de Compactación de Pulvimateriales – Parte II. Revista Internacional de Métodos Numéricos para el Cálculo y diseño en Ingeniería Vol. 14, No.1, pp. 101-116. 1998. ISSN: 0213-1315.
  21. Car, S. Oller, E. Oñate (1998). Un Modelo Elasto Plástico Acoplado con Daño Mecánico e Higrométrico. Aplicación a Pavimentos Flexibles. Revista Internacional de Ingeniería de Estructuras. Vol. 3, No.1, pp. 19-37. 1998. ISSN: 1390-0315.
  22. Oller, A. Suero (1999). Tratamiento del Fenómeno de Fatiga Isotérmica Mediante la Mecánica de Medios Continuos. Revista Internacional de Métodos Numéricos para el Cálculo y diseño en Ingeniería Vol. 15, No.1, pp. 3-29. 1999. ISSN: 0213-1315.
  23. Rubert, S. Oller, E. B. Las Casas, S. Proença, E. Oñate (1999). A Large Strain Explicit Formulation for Composites. International Journal of Numerical Methods in Engineering. Vol. 46, No.10, pp. 1595-1607. 1999. ISSN: 0029-5981.
  24. López, S. Oller, E. Oñate, J. Lubliner (1999). A Homogeneous Constitutive Model for Masonry. International Journal of Numerical Methods in Engineering. Vol. 46, No.10, pp. 1651-1671. 1999. ISSN: 0029-5981.
  25. Salomón, S. Oller, A. Barbat (1999). Finite Element Analysis of Base Isolated Buildings Subjected to Earthquake Load. International Journal of Numerical Methods in Engineering. Vol. 46, No.10, pp. 1741-1761. 1999. ISSN: 0029-5981.
  26. Car, S. Oller, E. Oñate(2000) . An Anisotropic Elasto Plastic Constitutive Model for Large Strain Analysis of Fiber Reinforced Composite Materials. Computer Methods in Applied Mechanics and Engineering.Vol. 185, No. 2-4, pp. 245-277. 2000. ISSN: 0045-7825.
  27. Salomón, S. Oller, A. Barbat (2000). Simulación Numérica de Elastómeros multifase en Estiramientos principales. Revista Internacional de Métodos Numéricos para el Cálculo y diseño en Ingeniería Vol. 16, No.1, pp. 115-144. 2000. ISSN: 0213-1315.
  28. Armero, S. Oller (2000). A General Framework for Continuum Damage Models. Part I: Infinitesimal Plastic Damage Models in Stress. International Journal of Solids and Structures. Vol.37, No.48-50, pp. 7409-7436. Nov. 2000. ISSN: 0020-7683.
  29. Armero, S. Oller (2000). A General Framework for Continuum Damage Models. Part II: Integration Algorithms, with Applications to the Numerical Simulation of Porous Metals. International Journal of Solids and Structures. Vol.37, No.48-50, pp. 7437-7464. Nov. 2000. ISSN: 0020-7683.
  30. Salomón, S. Oller, A. Barbat (2000). Análisis Sísmico de Edificios con Dispositivos de Aislamiento de Base Elastoméricos. Revista Internacional de Métodos Numéricos para el Cálculo y diseño en Ingeniería Vol. 16, No.2, pp. 281-304. 2000. ISSN: 0213-1315.
  31. Car, S. Oller, E. Oñate (2001). A Large Strain Plasticity for Anisotropic Materials: Composite Material Application. International Journal of Plasticity. Vol.17, No. 11, pp. 1437-1463. Nov. 2001. ISSN: 0749-6419.
  32. Car, S. Oller, E. Oñate (2001). Estudio de la Adherencia en Materiales Compuestos Reforzados con Fibras. Aplicación a Hormigón Armado. Revista Internacional de Ingeniería de Estructuras. Vol. 6, No.1, pp. 45-57. 2001. ISSN: 1390-0315.
  33. Car, F. Zalamea, S. Oller, J. Miquel, E. Oñate (2002). Numerical simulation of fiber reinforced composite materials. Two procedures. International Journal of Solids and Structures. Vol.39, No.7, pp. 1967-1986. Abril. 2002. ISSN: 0020-7683.
  1. Gómez Soberón, S. Oller y Alex H. Barbat (2002). Evaluación del daño sísmico en puentes de hormigón armado. Revista Internacional de Métodos Numéricos para el Cálculo y Diseño en Ingeniería Vol. 18, No. 2, pp. 309-329. Jul./2002. ISSN: 0213-1315.
  2. Gómez Soberón, S. Oller y Alex H. Barbat (2002). Evaluación de la vulnerabilidad del puente Warth en Austria. Revista Internacional de Desastres Naturales Accidentes e Infraestructura Civil en Ingeniería Vol. 2, No. 1, pp. 3-18. May./2002. ISSN: 1535-0088.
  3. Salomón, S. Oller and E. Oñate (2002). Fatigue Analysis of Materials and Structures Using a Continuum Damage Model. International Journal of Forming Processes – Vol.5, No. 2-3-4. pp. 493-503. /2002. ISSN: 1292-7775.
  4. Gómez Soberón, S. Oller y Alex H. Barbat (2002). Evaluación de la vulnerabilidad sísmica del puente Warth (Austria) mediante un modelo simplificado. Revista Internacional de Métodos Numéricos para el Cálculo y Diseño en Ingeniería Vol. 18, No. 3, pp. 433-453. Nov./2002. ISSN: 0213-1315.
  5. Oller, E. Car and J. Lubliner (2003). Definition of a general implicit orthotropic yield criterion. Computer Methods in Applied Mechanics and Engineering.Vol. 192, No. 7-8, pp. 895-912. Feb./2003. ISSN: 0045-7825.
  6. Luccioni, S. Oller (2003). A Directional Damage Model. Computer Methods in Applied Mechanics and Engineering. Vol. 192, No. 9-10, pp. 1119-1145. Mar./2003. ISSN: 0045-7825.
  7. Oller, O. Salomón, E. Oñate (2005). A continuum mechanics model for mechanical fatigue analysis. Computational Materials Science, Volume 32, Issue 2, pp. 175-195. Feb./2005. ISSN: 0927-0256.
  8. Oller, J. Miquel, F. Zalamea (2005). Composite Material Behavior Using a Homogenization Double Scale Method. Journal of Engineering Mechanics – ASCE. Vol. 131, No. 1, pp. 65-79. Jan./2005. ISSN: 0733-9399.
  9. Nallim, S. Oller, R. Grossi (2005). Statical and Dynamical behaviour of Thin Fibre Reinforced Composite Laminates with Diferent Shapes. Computer Methods in Applied Mechanics and Engineering. Vol. Vol.194, Issue 17, pp. 1797-1822. Apr./2005. ISSN: 0045-7825.
  10. Oller, A. Barbat (2005). Moment-curvature damage model for bridges subjected to seismic loads. Computer Methods in Applied Mechanics and Engineering. Vol 195/33-36, pp. 4490-4511. Article in Press. Available online 28 November 2005. ISSN: 0045-7825.
  11. Perazzo, S. Oller, J. Miquel (2006). Avances en el método de puntos finitos para mecánica de sólidos. Revista Internacional de Métodos Numéricos para el Cálculo y diseño en Ingeniería Vol. 22, No.2, pp. 153-168. 2006. ISSN: 0213-1315.
  12. Rastellini, O. Salomón, S. Oller and E. Oñate (2006). Non-Linear mechanical damage modelling for long fibre-The e-Journal and Exhibition of Non-destructive Testing – Electronic Publication. www.ndt.net (CDCM 2006). ISSN 1435-4934reinforced laminates.
  13. C. Vielma, A. Barbat, S. Oller (2006). Factores de reducción de respuesta. Estado del arte y estudio comparativo entre códigos. Revista Internacional de Ingeniería de Estructuras. Vol. 11, No.1, pp. 77-106. 2006. ISSN: 1390-0315,
  14. M. González, J. Miquel, S. Oller, and R. Miró (2007). A viscoplastic constitutive model with strain rate variables for asphalt mixtures – Numerical simulation. Computational Materials Science. Vol. 38, pp. 543-560. ISSN: 0927-0256.
  15. T. De la Cruz F. López-Almansa, S. Oller (2007). Numerical simulation of the seismic behavior of building structures equipped with friction energy dissipators. Computers and Structures Vol. 85, Issue 1-2, pp.30-42. Jan. 2007. ISSN: 0045-7949
  16. Mata, R. Boroschek, A. Barbat and S. Oller (2007). High damping rubber model for energy dissipating devices. Journal of Earthquake Engineering (JEE). Vol. 11, pp. 231-256. 2007. ISSN: 1363-2469.
  17. Rastellini, S. Oller, O. Salomón and E. Oñate (2008). Composite material non-linear modelling for long fibre-reinforced laminates. Continuum basis, computational aspects and validations. Computers and Structures Vol. 86, pp. 879-896. Available online 3 July 2007. ISSN: 0045-7949
  18. Mata A., S. Oller M., A.H. Barbat (2007). Static analysis of beam structures under nonlinear geometric and constitutive behaviour. Computer Methods in Applied Mechanics and Engineering. Vol.196, pp. 4458-4478. ISSN: 0045-7825
  19. Mata A., S. Oller and A.H. Barbat (2008). Dynamic analysis of beam structures considering geometric and constitutive nonlinearity, Computer Methods in Applied Mechanics and Engineering. Vol.197, pp. 857-878. ISSN: 0045-7825
  20. C. Vielma, Alex H. Barbat, S. Oller (2007). Curvas de fragilidad y matrices de probabilidad de daño de edificios de concreto armado con ductilidad limitada. Revista Internacional de Desastres Naturales Accidentes e Infraestructura Civil en Ingeniería Vol. 7, No. 2-3, pp. 273-286. ISSN: 1535-0088.
  21. C. Vielma, A.H. Barbat, S. Oller (2007). Non-linear response of reinforced concrete buildings designed for restricted ductility [Respuesta no lineal de edificios de concreto armado diseñados para baja ductilidad]. Boletin Tecnico/Technical Bulletin, 45 (2), pp 12-34. ISSN: 0376723X.
  22. Barbat, J.C. Vielma, S. Oller (2007). Comparación de los fatores de reducción de respuesta de la norma NCSE-02 y del Eurocódigo 2008. Hormigón y Acero No. 246, pp.79-95, 4to trimestre 2007. ISSN: 0439-5689.
  23. C. Vielma, A. Barbat, S. Oller (2008). Un índice de daño sísmico objetivo para la evaluación de los edificios de hormigón armado. Hormigón y Acero Vo. 59, No. 248, pp.53-64, Abril-Junio, 2008. ISSN: 0439-5689.
  24. C. Vielma, A. Barbat, S. Oller (2008). Comportamiento sísmico de edificios de hormigón armado de ductilidad limitada. Hormigón y Acero Vo. 59, No. 248, pp.87-101, Abril-Junio, 2008. ISSN: 0439-5689.
  25. C. Vielma, Alex H. Barbat, S. Oller (2008). Umbrales de daño para estados límite de edificios porticados de concreto armado diseñados conforme al ACI-318/IBC-2006. Revista Internacional de Desastres Naturales Accidentes e Infraestructura Civil en Ingeniería Vol. 8, No. 2, pp. 119-134. ISSN: 1535-0088.
  26. Faleiro, S. Oller and A.H. Barbat (2008). Plastic–damage seismic model for reinforced concrete frames. Computers and Structures Vol.86, pp. 581-597. ISSN: 0045-7949.
  27. Nallim, S. Oller (2008). An analytical–numerical approach to simulate the dynamic behaviour of arbitrarily laminated composite plates. Composite Structures. Vol. 85, Issue 4, pp. 311-325. Available online 23 October 2007. ISSN: 0263-8223.
  28. Martinez, S. Oller, F. Rastellini, A. Barbat (2008). A numerical procedure simulating RC structures reinforced with FRP using the serial/parallel mixing theory. Computers and Structures, Vol. 86, pp. 1604-1618. ISSN: 0045-7949.
  29. Mata P, A. Barbat, S. Oller (2008). Two-scale approach for the nonlinear dynamic analysis of RC structures with local non-prismatic parts. Engineering Structures, Vol. 30, pp. 3667-3680. doi:10.1016/j.engstruct.2008.06.011. ISSN: 0141-0296
  30. Mata, A.H. Barbat, S. Oller, R. Boroschek (2008). Constitutive and Geometric Nonlinear Models for the Seismic Analysis of RC Structures with Energy Dissipators. Arch Comput Methods Eng (2008) 15: 489–539. ISSN. 1134-3060. DOI 10.1007/s11831-008-9024-z.
  31. Oller, X. Martinez, A. Barbat, F. Rastellini (2008). Advanced Composite Material Simulation. Ciência e Tecnologia dos Materiais. Vol. 17, No. 1,2; pp. 1-14. 2008. ISSN: 0870-8312.
  32. C. Vielma, A. Barbat, S. Oller (2008). Reserva de Resistencia de edificios porticados de concreto armado diseñado conforme al ACI-318/IBC-2006. Ingeniería, Vol 18 (1,2) – pp.121-131. I.S.S.N. 1409-2441.
  33. Miró, F. Pérez, S. Oller, J. Miquel, J.M. González (2008). A numerical-experimental method for characterizing recycled asphalt mixtures. Road Materials and Pavement Design, 9 (4), pp. 711-730. ISSN: 1468-0629.
  34. Vielma, A. Barbat, S. Oller (2009). Seismic performance of waffled-slab floor buildings. Proceedings of the Institución of Civil Engineers-Structures and Buildings, 162, Issue SB3, 2009; 169-182. ISSN: 0965-0911.
  35. Mata, A. Barbat, S. Oller, R. Boroschek (2009). Non-linear seismic analysis of RC structures with energy-dissipating devices. International Journal for Numerical Methods in Engineering. Vol. 78:1037-1075. ISSN: 0029-5981.
  36. Molina, S. Oller, A. Barbat, X. Martinez (2009). Estudio de estructuras de Hormigón reforzado con FRP mediante la Teoría de Mezclas Serie/Paralelo. Rev. Internacional de Ingeniería de Estructuras Vol.13 y 14, 1, pp. 29-55. ISSN: 1390-0315
  37. Molina, J. Cruz, S. Oller, A. Barbat, L. Gil (2009). Estudio de la interfaz Hormigón-Epoxi-FRP de un ensayo de doble cortante por medio de la Teoría de Mezclas Serie/Paralelo. Rev. Internacional de Ingeniería de Estructuras Vol.13 y 14, 1, pp. 99-116. ISSN: 1390-0315
  38. Martinez, S. Oller (2009). Numerical Simulation of Matrix Reinforced Composite Materials Subjected to Compression Loads. Arch. Comput. Methods. Vol 16, No 4 / Dic/2009. Pag. 357-397. Eng. DOI 10.1007/s11831-009-9036-3. ISSN. 1134-3060.
  39. Vielma, A. Barbat, S. Oller (2010). Seismic safety of low ductility structures used in Spain. Bulletin of Earthquake Engineering. 8 (2010); 135-155. DOI 10.1007/s10518-009-9127-4. ISSN: 1570-761X (print version).
  40. Faleiro, S. Oller and A.H. Barbat (2010). Plastic-damage analysis of reinforced concrete frames. Engineering Computations: International Journal for Computer-Aided Engineering and Software Vol. 27 No.1, 2010. pp. 57-83. Emerald Group Publishing Limited 0264-4401. DOI 10.1108/02644401011008522.
  41. Oller, F. J. Bellomo, F. Armero and L G Nallim (2010). A stress driven growth model for soft tissue considering biological availability. IOP Conf. Series: Materials Science and Engineering 10 (2010) 012121. ISSN: 1757-899X. doi:10.1088/1757-899X/10/1/012121.
  42. Molina, S. Oller, A.H. Barbat, X. Martínez (2010). Análisis numérico de estructuras de hormigón reforzadas con FRP por medio de la teoría de mezclas serie/paralelo. Revista Internacional de Métodos Numéricos para el Cálculo y diseño en Ingeniería Vol 26, No.2, pp. 135,175. ISSN: 0213-1315.
  43. Martinez, F. Rastellini, F. Flores, S. Oller, E. Oñate (2011). Computationally optimized formulation for the simulation of Composite materials and delamination failures. Composites Part B: Engineering. Part B, Vol. 42 (2011) pp. 134–144. doi:10.1016/j.compositesb.2010.09.013. ISSN: 1359-8368.
  44. Molina, J.J. Cruz, S. Oller, A. Barbat, L. Gil. (2012). Estudio numérico-experimental de la interfaz hormigón-epoxi-FRP para una estructura reforzada sometida a doble cortadura. Revista Internacional de Métodos Numéricos para el Cálculo y diseño en Ingeniería Vol 28(2), pp. 66-79. ISSN: 0213-1315. DOI: 10.1016/j.rimni.2011.11.007
  45. J M. González, S. Oller, J. Miquel, R. Miró (2011). Una metodología para la simulación de mezclas asfálticas recicladas. Revista Internacional de Métodos Numéricos para el Cálculo y diseño en Ingeniería Vol 27, pp. 147,163. ISSN: 0213-1315.
  46. A. Paredes, A. H. Barbat and S. Oller (2011). A compression-tension concrete damage model, applied to a wind turbine reinforced concrete tower. Engineering Structures 33 (2011), pp. 3559-3569. ISSN: 0141-0296. DOI information: 10.1016/j.engstruct.2011.07.020
  47. J. Bellomo, S. Oller, L. G. Nallim (2011). An inverse approach for the mechanical characterisation of vascular tissues via a generalised rule of mixtures. Computer Methods in Biomechanics and Biomedical Engineering. Pp. 1-6. DOI:10.1080/10255842.2011.585976. Taylor and Francis, ISSN 1025-5842 print/ISSN 1476-8259 online.
  48. Martínez, S. Oller, E. Barbero (2011). Caracterización de la delaminación en materiales compuestos mediante la teoría de mezclas serie/paralelo. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería. 27(3):189–199, DOI:10.1016/j.rimni.2011.07.001. Elsevier. ISSN: 0213-1315.
  49. Quinteros, S. Oller, L. Nallim (2011). Nonlinear homogenization techniques to solve masonry structures problems. Composite Structures. Vol. 94, pp.724–730. doi:10.1016/j.compstruct.2011.09.006. ISSN: 0263-8223.
  50. Molina, J.J. Cruz, S. Oller, A.H. Barbat, Ll. Gil (2011). Comportamiento de la interfaz concreto-epoxi-FRP utilizando la teoría de mezclas serie/paralelo. Ingeniería e Investigación. Vol. 31 No. 3, Dic. 2011, pp. 26-39. p-ISSN: 0120-5609, e-ISSN: 2248-8723.
  51. C. Vielma, A. Barbat, S. Oller (2011). Seismic safety of RC framed buildings designed according to modern codes. Journal of Civil Engineering and Architecture, Vol. 5. No. 7 (Serial No. 44), pp 567-575. print-ISSN 1934-7359. online-ISSN 1934-7367 USA.
  52. Bellomo, S. Oller, F. Armero, L. Nallim (2011). A general constitutive model for vascular tissue considering stress driven growth and biological availability. CMES – Computer Modeling in Engineering and Sciences 2011; Vol.80, No.1, pp 1-22. ISSN: 1526-1492 (printed); ISSN:1526-1506 (online).
  53. A. Perez, L. Gil, S. Oller (2011). Non-destructive testing evaluation of low velocity impact damage in carbon fiberreinforced laminated composites. ULTRAGARSAS (ULTRASOUND), Vol. 66, No. 2, 2011. http://dx.doi.org/10.5755/j01.u.66.2.526. ISSN 1392-2114
  54. Oñate, A. Eijo, S. Oller (2012). Simple and accurate two-noded beam element for composite laminated beams using a refined zigzag theory. Computer Methods in Applied Mechanics and Engineering. 213–216 (2012), pp 362–382. doi:10.1016/j.cma.2011.11.023. ISSN: 0045-7825
  55. Bastos de Souza, E. Casas, S. Oller (2013). Analytical and numerical analysis of human dental occlusal contact. Computer Methods in Biomechanics and Biomedical Engineering. 16(5):495-503. doi: 10.1080/10255842.2011.627328. Epub 2012 Jan 30. Taylor and Francis, ISSN 1025-5842 print/ISSN 1476-8259.
  56. S. Lee, C. Morillo, G. Bugeda, S. Oller, E. Onate (2012). Multilayered composite structure design optimisation using distributed/parallel multi-objective evolutionary algorithms. Composite Structures, Volume 94, Issue 3, February 2012, Pag 1087-1096. ISSN: 0263-8223
  57. G. Nallim, F. Bellomo,R. Quinteros and S. Oller (2012). Dynamical Analysis of Long Fiber-Reinforced Laminated Plates with Elastically Restrained Edges. Hindawi Publishing Corporation. Advances in Acoustics and Vibration. Volume 2012, Article ID 189376, 16 pages, doi:10.1155/2012/189376.
  58. Bellomo, S. Oller, F. Armero, L. Nallim (2012). A constitutive model for tissue adaptation: necrosis and stress driven growth. Mechanics Research Communications, 2012;42,51-59. Online publication: doi:10.1016/j.mechrescom.2011.11.007. ISSN: 0093-6413
  59. López-Almansa, J.C. Castro-Medina, S. Oller (2012). A numerical model of the structural behavior of buckling-restrained braces. Engineering Structures 41 (2012) 108–117. http://dx.doi.org/10.1016/j.engstruct.2012.03.045. ISSN: 0141-0296.
  60. Otero, X. Martínez, S. Oller, O. Salomón, O. (2012). Study and prediction of the mechanical performance of a nanotube-reinforced composite. Composite Structures. Vol. 94, pp.2920–2930. 2012. ISSN: 0263-8223
  61. A. Oller Aramayo, L. G. Nallim, S. Oller (2012). Material compuesto vs acero en el conformado de un rotor de turbina hidroeléctrica – ventajas en su utilización. Revista Iberoamericana de Ingeniería Mecánica. Vol. 16, N.º 1, pp. 03-16, 2012. ISSN: 1137-2729.
  62. S. Lee, C. Morillo, S. Oller, G. Bugeda, E. Onate (2013). Robust design optimisation of advance hybrid (fiber–metal) composite structures. Composite Structures, Volume 99, 2013, Pages 181-192. ISSN: 0263-82231.
  63. F. Rango, L. G. Nallim, S. Oller (2013). Static and dynamic analysis of thick laminated plates using enriched macroelements. Composite Structures, Volume 101, 2013, Pages 94–103. ISSN: 0263-8223.
  64. A. Pérez, X. Martínez, S. Oller, L. Gil, F. Rastellini, F. Flores (2013). Impact damage prediction in carbon fiber-reinforced laminated composite using the matrix-reinforced mixing theory. Composite Structures. Volume 104, issue, year 2013, pp. 239 – 248. ISSN: 0263-8223.
  65. A. Oller, L. Nallim, and S. Oller (2013). An integrated procedure for the structural design of a composite rotor-hydrofoil of a water current turbine (WCT). Applied Composite Materials. Vol. 20, Issue 6 (2013), Page 1273-1288. Print ISSN: 0929-189X. Online ISSN: 1573-4897, DOI: 10.1007/s10443-013-9332-9.
  66. Eijo, E. Oñate, S. Oller (2013). A four-noded quadrilateral element for composite laminated plates/shells using the refined zigzag theory. International Journal for Numerical Methods in Engineering. Volume 95, Issue 8, pages 631–660, 24 August 2013. Published online: 20 MAY 2013. DOI: 10.1002/nme.4503. ISSN: 0029-5981.
  67. Eijo, E. Oñate, S. Oller (2013). A numerical model of delamination in composite laminated beams using the LRZ beam element based on the refined zigzag theory. Composite Structures. Volume 104, October 2013, Pages 270–280. ISSN: 0263-8223.
  68. Chacón, N. Uribe, S. Oller (2013). Numerical Validation of the Incremental Launching Method of a Steel Bridge Through a Small-Scale Experimental Study. Experimental Techniques (SEM). Wiley Online Library. November 2013, doi:10.1111/ext.12069. Online  ISSN: 1747-1567.
  69. A. Pérez, L. Gil, M. Sánchez, S. Oller (2014). Comparative experimental analysis of the effect caused by artificial and real induced damage in composite laminates. Composite Structures. Volume 112, 2014, Pages 169–178. http://dx.doi.org/10.1016/j.compstruct.2014.02.017. ISSN: 0263-8223.
  70. Pelà, M. Cervera, S. Oller, M. Chiumenti (2014). A localized mapped damage model for orthotropic materials. Engineering Fracture Mechanics. Volumes 124–125, July 2014, Pages 196–216. DOI: 10.1016/j.engfracmech.2014.04.027, http://dx.doi.org/10.1016/j.engfracmech.2014.04.027. Published online: 9/5/2013. ISSN: 0013-7944.
  71. A. Pérez, L. Gil, S. Oller (2014). Impact damage identification in composite laminates using vibration testing. Composite Structures. Volume 108, issue 1, year 2014, pp. 267 – 276. ISSN: 0263-8223.
  72. F. Rango, L. G. Nallim, S. Oller (2014). Formulation of enriched macro elements using trigonometric shear deformation theory for free vibration analysis of symmetric laminated composite plate assemblies. Composite Structures 119 (2015), pp 38–49. ISSN: 0263-8223. http://dx.doi.org/10.1016/j.compstruct.2014.08.012
  73. C. Castro Medina, F. López Almansa, S. Oller (2014). Modelización numérica del comportamiento estructural cíclico de barras esbeltas de acero con pandeo restringido. Revista Internacional de Métodos Numéricos para el Cálculo y diseño en Ingeniería Vol 30. Nro. 4, pp. 229-231. ISSN: 0213-1315. DOI: http://dx.doi.org/10.1016/j.rimni.2013.07.008
  74. López-Almansa, S. Oller (2014). Resolución numérica de las ecuaciones del movimiento de edificios de varias plantas con no linealidades severas. Revista Internacional de Métodos Numéricos para el Cálculo y diseño en Ingeniería Vol 30. Nro. 03, pp. 194-202. ISSN: 0213-1315. DOI: http://dx.doi.org/10.1016/j.rimni.2013.06.007
  75. E. Vargas, E. Oñate, S. Oller (2014). Formulación de elementos finitos para vigas de sección abierta formadas por laminados compuestos incluyendo las deformaciones tangenciales por cortante y torsión. Revista Internacional de Métodos Numéricos para el Cálculo y diseño en Ingeniería Vol 30. Nro. 4, pp. 238-246. ISSN: 0213-1315. DOI: http://dx.doi.org/10.1016/j.rimni.2013.07.007
  76. Pérez-Pozo, A. Campos, S. Lascano, S. Oller, A. Rodriguez-Ferran (2014). A Finite Points Method Approach for Strain Localization Using the Gradient Plasticity Formulation. Mathematical Problems in Engineering, Vol. 2014, Article ID 782079, 12 pages, 2014. ISSN: 1024-123X (Print), ISSN: 1563-5147 (Online). DOI: 10.1155/2014/782079.
  77. Martinez, S. Oller, L.G. Barbu, A.H. Barbat, A.M.P. de Jesus (2015). Analysis of Ultra Low Cycle Fatigue problems with the Barcelona plastic damage model and a new isotropic hardening law. International Journal of Fatigue. Vol. 73, pp. 132–142, 2015. ISSN: 0142-1123. DOI:10.1016/j.ijfatigue.2014.11.013
  78. Comellas, S. Ivvan Valdez, S. Oller, S. Botello (2015). Optimization method for the determination of material parameters in damaged composite structures. Composite Structures 122 (2015), pp. 417–424. ISSN: 0263-8223, doi:10.1016/j.compstruct.2014.12.014
  79. Otero, S. Oller, X. Martínez, O. Salomón, O. (2015). Numerical homogenization for composite materials analysis. Comparison with other micro mechanical formulations. Composite Structures, Volume 122, Pages 405-416. 2015. ISSN: 0263-8223, doi:10.1016/j.compstruct.2014.11.041
  80. A. Oller, L. Nallim, S. Oller (2016). The usability of the Selig S1223 profile airfoil as a high lift hydrofoil for hydrokinetic application. Journal of Applied Fluid Mechanics (JAFM), Volume 9, Number 3, pp. 537-542, EISSN 1735-3645. ISSN 1735-3572. ISSN 1735-3645 (Online).
  81. G. Barbu, S. Oller, X. Martinez, A H. Barbat and (2015). High cycle fatigue simulation: A new stepwise load-advancing strategy. Engineering Structures 97 (2015) 118–129. ISSN: 0141-0296. doi: 10.1016/j.engstruct.2015.04.012
  82. Eijo, E. Oñate, S. Oller (2014). Delamination in laminated plates using the 4-noded quadrilateral QLRZ plate element based on the refined zigzag theory. Composite Structures. Volume 108, February 2014, Pages 456–271. ISSN: 0263-DOI: 8223.http://dx.doi.org/10.1016/j.compstruct.2013.09.052. DOI: 8223.http://dx.doi.org/10.1016/j.compstruct.2013.09.052
  83. F. Rango, L. G. Nallim, S. Oller (2015). An Enriched Macro Finite Element for the Static Analysis of Thick General Quadrilateral Laminated Composite Plates. Mechanics of Advanced Materials and Structures. ISSN 1537-6494 (Print), 1537-6532 (Online).  DOI: 10.1080/15376494.2015.1068400
  84. Perez, S. Oller, C. A. Felippa, L. Gil (2015). Micro-mechanical approach for the vibration analysis of CFRP laminates under impact-induced damage. Composites Part B: Engineering. Part B, Vol. 83 (2015) pp. 306–316. doi:10.1016/j.compositesb.2015.08.059. ISSN: 1359-8368.
  85. G. Barbu, X. Martinez, S. Oller, A.H. Barbat (2015). Validation on large scale tests of a new hardening-softening law for the Barcelona plastic damage model, International Journal of Fatigue Vol. 81, pp. 213–226, 2015. ISSN: 0142-1123. DOI:10.1016/j.ijfatigue. 2015.07.031
  86. Comellas, F.J. Bellomo and S. Oller (2015). A generalized finite-strain damage model for quasi-incompressible hyperelasticity using hybrid formulation. International Journal for Numerical Methods in Engineering, 2015. doi:10.1002/nme.5118. ISSN: 0029-5981
  87. Petracca, L. Pelà, R. Rossi, S. Oller, G. Camata. E. Spacone (2016). Regularization of first order computational homogenization for multiscale analysis of masonry structures. Computational Mechanics, 57(2), 257-276. DOI 10.1007/s00466-015-1230-6. Print ISSN: 178-7675, Online ISSN: 1432-0924.
  88. A Oller, L. G. Nallim, and S. Oller, S. (2016), Fluid dynamic design of an axial rotor for hydrokinetic riverbed turbine-improvement introduced by a high lift foil profile. Environ. Prog. Sustainable Energy. Wiley. Vol 35, No 4., pp 1198-1206 doi: 10.1002/ep.12320. Feb./2016. ISSN: 1944-7450
  89. Comellas, TC. Gasser, FJ. Bellomo, S. Oller (2016), A homeostatic-driven turnover remodelling constitutive model for healing in soft tissues. J. R. Soc. Interface, Vol13, Issue: 116, 20151081. http://dx.doi.org/10.1098/rsif.2015.1081. Mar./2016. Royal Society Publishing. Print: ISSN 1742-5689. Online: ISSN 1742-5662.
  90. Otero, X. Martínez, S. Oller, O. Salomón, O. (2015). An efficient multi-scale method for non-linear analysis of composite structures. Composite Structures, Volume 131, Pages 707-719. 2015. ISSN: 0263-8223, doi:10.1016/j.compstruct.2015.06.006.
  91. Paredes, S. Oller, A. Barbat (2016). New Tension-Compression Damage Model for Complex Analysis of Concrete Structures. Journal of Engineering Mechanics – ASCE. 04016072. Vol. 142, No. 10, Jun./2016. ISSN (print): 0733-9399, ISSN (online): 1943-7889. DOI: 10.1061/(ASCE)EM.1943-7889.0001130
  92. Escudero, S. Oller, X. Martinez, A. Barbat (2016). A laminated structural finite element for the behavior of large non-linear reinforced concrete structures. Finite Elements in Analysis and Design. Vol. 119, 15 October 2016, pp 78–94. ISSN: 0168-874X. DOI:10.1016/j.finel.2016.06.001
  93. Chacón and S. Oller (2016). Designing Experiments Using Digital Fabrication in Structural Dynamics. Journal of Professional Issues in Engineering Education and Practice. American Society of Civil Engineers (ASCE). ISSN 1052-3928. DOI: 10.1061/(ASCE)EI.1943-5541.0000315.
  94. Alfarah, F. López-Almansa, S. Oller (2017). New methodology for calculating damage variables evolution in Plastic Damage Model for RC structures. Engineering Structures 132 (2017), pp. 70-86. ISSN: 0141-0296. DOI information: http://dx.doi.org/10.1016/j.engstruct.2016.11.022
  95. Petracca, L. Pela, R. Rossi, S. Oller, G. Camata, E. Spacone (2017). Multiscale computational first order homogenization of thick shells for the analysis of out-of-plane loaded masonry walls. Computer Methods in Applied Mechanics and Engineering. 315 (2017), pp 273–301. ISSN: 0045-7825. DOI: http://dx.doi.org/10.1016/j.cma.2016.10.046.
  96. Otero, S. Oller, X. Martinez (2016). Multiscale Computational Homogenization: Review and Proposal of a New Enhanced-First-Order Method. Arch. Computat. Methods Eng. 25/11/2016. ISSN. 1134-3060. DOI 10.1007/s11831-016-9205-0.
  97. Nallim, S. Oller, E. Oñate, F. Flores (2017). A hierarchical finite element for composite laminated beams using a refined zigzag theory. Composite Structures 163 (2017) 168–184. ISSN ISSN: 0263-8223. DOI 10.1016/j.compstruct.2016.12.031
  98. Montero-Chacón, S. Zaghi, R. Rossi, E. García-Pérez, I. Heras-Pérez, X. Martínez, S. Oller, M. Doblaré (2017). Multiscale thermo-mechanical analysis of multi-layered coatings in solar thermal applications. Finite Elements in Analysis and Design, Vol. 127, May 2017, pp. 31–43.  ISSN: 0168-874X. DOI: http://dx.doi.org/10.1016/j.finel.2016.12.006
  99. G. Flores, L. G. Nallim, S. Oller (2017). Formulation of solid-shell finite elements with large displacements considering different transverse shear strains approximations. Finite Elements in Analysis and Design 130 (2017) pp 39–52. ISSN: 0168-874X. DOI: 10.1016/j.finel.2017.03.001
  100. Escudero, S. Oller, X. Martinez, A. Barbat (2017). Procedure based on composite fem technology for the resolution of concrete framed structures with masonry in-fills – comparison with Mexican building code. ASCE. J. Eng. Mech., 2017, 143(9): 04017080 /2017. ISSN (print): 0733-9399, ISSN (online): 1943-7889. DOI: 10.1061/(ASCE)EM.1943-7889.0001275
  101. Alfarah, J. Murcia‐Delso, F. López‐Almansa, S. Oller (2017). RC structures cyclic behavior simulation with a model integrating plasticity, damage, and bond‐slip. Earthquake Engng. Struct. Dyn. pp. 1–19. John Wiley & Sons. ISSN: 1096-9845. DOI: https://doi.org/10.1002/eqe.2974
  102. Comellas1, F. Bellomo, I. Rosales, L. del Castillo, R. Sánchez, P. Turon, and S. Oller (2018). On the feasibility of the computational modelling of the endoluminal vacuum-assisted closure of an oesophageal anastomotic leakage. Royal Society Open Science. 5: 171289.  ISSN: 2054-5703. DOI: http://dx.doi.org/10.1098/rsos.171289
  103. Alfarah, JF. López‐Almansa, S. Oller (2018). Numerical Study on the Relevance of Columns Hidden Failure Modes in the Seismic Capacity of Non-Ductile RC Frames. Journal of Earthquake Engineering 2018-04-11. Print ISSN: 1363-2469, Online ISSN: 1559-808X. DOI: 10.1080/13632469.2018.1458666
  104. Bachmann, X. Yi, H. Gong, X. Martinez, G. Bugeda, S. Oller, K. Tserpes, E. Ramon, C. Paris, P. Moreira, Z. Fang, Y. Li, Y. Liu, X. Liu, G. Xian, J. Tong, J. Wei, X. Zhang, J. Zhu, S. Ma, T. Yu (2018). Outlook on ecologically improved composites for aviation interior and secondary structures. CEAS Aeronautical Journal. pp 1–11. Springer Vienna. Print ISSN 1869-5582 Online ISSN 1869-5590.  DOI: https://doi.org/10.1007/s13272-018-0298-z
  1. Cornejo, L.G. Barbu, C. Escudero, X. Martínez, S. Oller, A.H. Barbat (2018). Methodology for the analysis of post-tensioned structures using a constitutive serial-parallel rule of mixtures. Composite Structures (2018). ISSN ISSN: 0263-8223. https://doi.org/10.1016/j.compstruct.2018.05.123
  2. Flores, S. Oller, L. Nallim (2018). On the analysis of non-homogeneous laminates using the refined zigzag theory. Composite Structures 204 (2018) 791–902. ISSN: 0263-8223. DOI: https://doi.org/10.1016/j.compstruct.2018.08.018
  3. Cuauhtemoc, S. Oller, X. Martinez, A. Barbat, and C. Davalos, (2018). Damage Assessment on the Modeling of a Large Scale Masonry Building. ASCE Journal of Engineering Mechanics, 144(12):04018107. ISSN (print): 0733-9399, ISSN (online): 1943-7889. DOI: 10.1061/(ASCE)EM.1943-7889.0001526.
  4. Quintana M.V., Raffo J. A variational approach to vibrations of laminated composite plates with a line hinge. European Journal of Mechanics/A Solids. 73 (2019) 11-21.
  5. Raffo y M. V. Quintana Natural vibrations of anisotropic plates with an internal curved line. International Journal of Mechanical Sciences. 120 (2017) 301-310. http://dx.doi.org/10.1016/j.ijmecsci.2016.11.031.n
  6. V. Quintana y J. Raffo. Eigen frequencies of generally restrained Timoshenko beams with an internal hinge. NED University Journal of Research-Structural Mechanics (NEDJR-STMECH002-2014)11(3) (2014) 1-18.
  7. V. Quintana y R. O. Grossi. Free vibrations of a Trapezoidal Plate with an Internal Line Hinge. The Scientific World Journal, 2014 (2014), 10 pages, doi:10.1155/2014/252084.
  8. V. Quintana y L. G. Nallim. A general Ritz formulation for the free vibration analysis of thick trapezoidal and triangular laminated plates resting on elastic supports. International Journal of Mechanical Sciences 69 (2013) 1-9.
  9. V. Quintana y R. O. Grossi. Tratamiento variacional de placas laminadas con rótulas intermedias utilizando la teoría de primer orden. Revista Iberoamericana de Ingeniería Mecánica 16(2) (2012) 41-56.
  10. V. Quintana y R. O. Grossi. Free vibrations of generally restrained rectangular plates with an internal line. Applied Acoustic 73(4) (2012) 356-365.
  11. V. Quintana y L. G. Nallim. A variational approach to free vibration analysis of shear deformable polygonal plates with variable thickness. Applied Acoustic, 71 (2010) 393-401.
  12. V. Quintana y R. O. Grossi, Eigen frequencies of generally restrained Timoshenko beams, Journal of Multi-body Dynamics, Proch. IMechE 224(1) Part K (2010), 117-125.
  13. O. Grossi y M. V. Quintana, The transition conditions in the dynamics of elastically restrained beams., Journal of Sound and Vibration, 316(2008) 274-297.
  14. Berejnoi, C., Perez Ipiña, J.E., “An Alternative Method for Small Pop in Assessment,” Engineering Fracture Mechanics, Vol.59, No. 5, pp.667-681, 1998, 15 páginas.
  15. Berejnoi, C., Perez Ipiña, J.E., “Reproducibility of Pop-ins in Laboratory Testing of Welded Joints,” Materials Research, Vol. 3, No. 4, pp. 139-146, 2000, 8 páginas.
  16. Berejnoi, C., Perez Ipiña, J.E. , “Evaluation of Some Methods for Lower Bound Determination in the Transition Region of Ferritic Steels,” Latin American Applied Research, Vol. 34, Nº4, pp.241-248, 2004.
  17. Berejnoi, C., Perez Ipiña, J.E., “Size effects in the transition region and the beginning of the upper shelf for ferritic steels,” Fatigue & Fracture of Engineering Materials & Structures, Vol. 33, Nº3, pp. 195-202(8), 2010. Disponible en: http://onlinelibrary.wiley.com/doi/10.1111/ffe.2010.33.issue-3/issuetoc
  18. Larrainzar, C., Berejnoi, C., Perez Ipiña, J.E., “Comparison of 3P-Weibull parameters based on JC and KJC values,” Fatigue & Fracture of Engineering Materials & Structures, Vol. 34 Nº6, 408-422, June 2011. doi: 10.1111/j.1460-2695.2010.01533.x. Disponible en: http://onlinelibrary.wiley.com/doi/10.1111/j.1460-2695.2010.01533.x/abstract
  19. Moya, J.A., Gamarra Caramella, S., Marta, L.J. and Berejnoi, C., “Design parameters for nanostructured soft magnetic alloys,” IEEE Transaction on Magnetics, Abril 2013, doi10.1109/TMAG.2013.2259149, http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6566206
  20. Moya, J.A., Gamarra Caramella, S., Marta, L.J. and Berejnoi, C., “A simple method for determining the lattice parameter and chemical composition in ternary bcc-Fe rich nanocrystals,” Journal of Alloys and Compounds 631 (2015) 99–104, doi:10.1016/j.jallcom.2015.01.014
  21. Berejnoi, C., Perez Ipiña, J.E., “Analysis of Size and Temperature Effects in the Ductile to Brittle Transition Region of Ferritic Steels,” Engineering Fracture Mechanics, Volume 148, November 2015, Pages 180–191, doi:10.1016/j.engfracmech.2015.09.041
  22. Perez Ipiña, J.E., Berejnoi, C. “Analysis of specimen size conversion in the ductile to brittle transition region of ferritic steels”, Procedia Structural Integrity, Volume 2, 2016, Pages 769–776 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy. doi:10.1016/j.prostr.2016.06.099,  http://www.sciencedirect.com/science/article/pii/S2452321616301044, fecha de consulta: 19/10/16
  23. Carlos Berejnoi, Santiago Vacca,  Claudia Galarza, Juan Elías Perez Ipiña, “Estimation of the fracture toughness threshold of a ferritic steel at the lower ductile to brittle transition region”, Materials Research, 2016, http://dx.doi.org/10.1590/1980-5373-MR-2015-0513, Materials Research, Print version ISSN 1516-1439, On-line version ISSN 1980-5373. http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392016005044102, fecha de consulta: 19/10/16
  24. Moya, J.A., Gamarra Caramella, S., y Berejnoi, “Evolution of soft magnetic, mechanical and electrical properties measured simultaneously during annealing of rapidly solidified alloys”, C. ISSN: 0304-8853 – Journal of Magnetism and Magnetic Materials Volume 476, 15 April 2019, Pages 248-253, doi: 10.1016/j.jmmm.2019.01.008
  25. Barbu, A. Cornejo, X. Martínez, S. Oller, AH. Barbat (2019). Methodology for the analysis of post-tensioned structures using a constitutive serial-parallel rule of mixtures: Large scale non-linear analysis. Composite Structures 216 (2019) 315–330. ISSN: 0263-8223. DOI: https://doi.org/10.1016/j.compstruct.2019.02.092
  26. Barbu, S. Oller, X. Martínez, AH. Barbat (2019). High-cycle fatigue constitutive model and a load-advance strategy for the analysis of unidirectional fiber reinforced composites subjected tolongitudinal loads. Composite Structures 220 (2019) 622–641. ISSN: 0263-8223. DOI: https://doi.org/10.1016/j.compstruct.2019.04.015
  27. Giuntoli, J. Aguilar, M. Vazquez, S. Oller and G. Houzeaux (2019). A FE2 multi-scale implementation for modeling composite materials on distributed architectures. Coupled Systems Mechanics, Vol. 8, No 2, April 2019, pages 99-109. ISSN: 2234-2184(Print), 2234-2192(Online). DOI: https://doi.org/10.12989/csm.2019.8.2.099